Skip to main content

Centre for Fire and Hazards Sciences facilities

Centre for Fire and Hazards Sciences (CFHS) Research Laboratory is one of the best equipped in the world.

The Centre for Fire and Hazards Sciences (CFHS) Research Laboratory has a wide range of experimental methods and over 50 years’ experience in the field of fire chemistry and toxicity. This accumulated knowledge and research expertise can be made available through specific research projects, general liaison, advice and consultancy services.

The CFHS Laboratory is fully equipped with modern analytical instrumentation and a comprehensive range of small and medium scale fire tests. The range of the analytical and fire test methods allow to investigate thoroughly the decomposition of polymers, the structure and formation of chars, and the gas phase products of decomposition and combustion, including quantification of toxic gases and particulates during the early and fully-developed fire scenarios.

The CFHS team, together with the experienced clinicians at the Royal Preston Hospital, is also working on developing number of analytical and laboratory methods that are used to confirm the presence of specific fire toxins in blood and urine.

More about specialised equipment and facilities is summarised below.

Explore the facilities

Gallery01 / 04

In order to understand, and alter, the behaviour of a material in a fire, it is necessary to know as much as possible about the processes of decomposition. These processes are often highly dependent on the conditions, particularly the atmosphere. The sensitivity of changes to say air, nitrogen, air/nitrogen, and even oxygen, or to heating rate or sample shape and size, can help to identify the processes occurring. Moreover, sensitivity to these parameters gives away vital clues needed to interpret the fire behaviour.

Discover microscale techniques

Assessment of toxic hazard is increasingly being recognised as an important factor in the assessment of fire hazard. Prediction of toxic fire hazard depends on two parameters.

Discover our fire smoke and effluent generation techniques

In addition to our specialised research equipment, UCLan also have a number of ISO, EN, BS and ASTM standard tests for ignitability, flammability, and heat release determination. These can be modified for use in research programmes but are also available as standard tests so that materials and product behaviour can be determined in a standard manner and results directly related to the requirements of industry and regulators.

Discover our ignitability and flame spread techniques techniques

We are very fortunate to enjoy an excellent working relationship with a large-scale outdoor burn facility. This has allowed us to accommodate a variety of large scale tests provided they can be conducted within a shipping container, or in the open air. We can also provide mobile fire monitoring facilities for sampling and effluent analysis. Please contact us if you feel you might benefit from access to these facilities.

Discover our large scale burn facilities

Computer simulation has become an integral part of fire safety engineering and this tendency is expected to increase with the evolution of performance based design. Condensed phase fuel production, which plays a pivotal role in fire growth, has become an increasingly large research area in the last decade, resulting in the development of numerical models of pyrolysis incorporating complex arrays of physical and chemical processes.

Discover our fire modelling

During recent years, analytical techniques have been used widely for the measurement of the concentrations of specific volatiles generated during both laboratory studies and real fires.

Discover our chemical analysis and materials characterisation

Laboratory and analytical services

Centre for Fire and Hazards Sciences Laboratories provide unique possibilities to analyse a number of fire effluents by using different fire and analytical test methods. 

We have developed analytical methods to detect: 

Acute Fire Toxicants

  • Hydrogen cyanide (HCN)
  • Carbon monoxide (CO)
  • Carbon dioxide (CO2)
  • Sulphur dioxide (SO2)
  • Nitrogen oxides (NO, NO2)
  • Hydrogen chloride (HCl)
  • Hydrogen bromide (HBr)
  • Hydrogen fluoride (HF)
  • Phosphoric Acid (H3PO4)
  • Acrolein (C3H4O)
  • Formaldehyde (CHOH)

Chronic and Persistent organic pollutants (POPs)

  • Particulates (within the size from 1 nanometre to 10 micrometres)
  • Isocyanates
  • Polycyclic Aromatic Hydrocarbons (PAHs)
  • Semi- and Volatile- Organic Compounds (VOCs)
  • Polychlorinated biphenyls (PCBs)
  • Polybrominated Diphenyls Ethers (PBDEs)
  • Phosphorus flame retardants (OPFRs)
  • Polychlorinated dibenzodioxins (PCDDs)
  • Polychlorinated dibenzofurans (PCDFs)
  • Perfluorooctanoic acid (PFOA)
  • Perfluorooctanesulfonic acid (PFOS)
  • Range of chemical elements (most present on the periodic table)
  • Synthetic Vitreous Fibres (SVFs)

Please contact us for further information or to discuss your needs with one of our scientists.

Find out more

To uncover our latest projects and recent news, please visit our primary page for the Centre for Fire and Hazards Sciences

To discover our current projects, please visit our primary page for the Centre for Fire and Hazards Sciences.

To read our recent news, please visit the primary page for the Centre for Fire and Hazards Sciences.

Contact us

We have an extensive range of equipment and facilities for quantifying fire behaviour and standard testing which is available for testing, research and consultancy.

Please get in touch with us to find out more.

Detailed Information

Kit List

  • Please contact us for a full and up-to-date kit and specification list of all equipment.
General Enquiry